❮
❯
Máquina de corte monocabezal con movimiento descendente de la cuchilla manual o automático. Tapa giratoria. Inclinación de la cabeza de 90° a 45° hacia la izquierda (eje Y). Dispositivo de bloqueo manual en cualquier ángulo intermedio. Especificaciones técnicas: diámetro de hoja 400mm, lubricación neumática, inclinación manual del cabezal (eje Y), rotación manual del cabezal, grados intermedios en manual, mordazas neumáticas.
|
MODEL |
TDE600 |
|
Dimensions |
L 7.800 x W 1.700 x H 2.200 mm |
|
Weight |
2.300 Kg |
|
Nominal power |
7 kW |
|
Absorbed power |
16 A |
|
Voltage |
400 V, 3-phase + Neutral |
|
Frequency |
50/60 Hz |
|
Air pressure |
7 bar |
|
Blade motor power |
2.8 kW |
|
Cutting angle range |
22.5° - 90° - 135° + Intermediates |
|
Saw blade diameter |
600 mm |
|
Blade rotations n° |
2.800 rpm |
|
Blade hole |
30 mm |
|
Number of teeth |
140 |
|
Blade thickness |
4.2/4.6 mm |
|
Minimum cut (simultaneous) |
340 mm |
|
Minimum cut (differentiated) |
280 mm |
|
Minimum cut (ultra-short) |
0 mm |
|
Maximum cut |
4.010 mm |
|
Maximum cut (oversize) |
7.510 mm |
|
Maximum speed |
25 m/min |
|
Precision |
0.15 mm |
|
Tilting of the cutting head |
Motorized |
|
Clamps |
4 horizontal + 2 vertical |
|
Blade lubrication system |
N.1 nozzle |
|
Lubricant tank capacity |
1+1 Liter |
|
Control |
15" |
|
USB port |
N.1 on the control panel |
|
Humidity |
75% |